How to connect 1.5m Flexible Gas Hose to gas equipment?

When connecting 1.5m Flexible Gas Hose to gas equipment, it is crucial to ensure the safety and reliability of the entire connection process. Choosing the right connection accessories is the key, because it is not only related to the stability of the connection, but also to the safety of the gas system. We need to accurately select the matching connection accessories according to the interface type, size and working pressure of the gas equipment. These accessories usually need to have excellent sealing performance, corrosion resistance and high pressure resistance to ensure that there will be no leakage or other safety hazards during long-term use.

In the preparation stage, we need to carefully check the end face of the 1.5m Flexible Gas Hose to ensure that it is flat, undamaged and oil-free. At the same time, the connection accessories should also be kept intact without damage or deformation. If necessary, apply an appropriate amount of sealing material, such as sealant or sealing tape, to the interface between the hose and the connection accessories to enhance the sealing of the connection.

Next, insert one end of the hose into the connection accessory and ensure that the insertion depth meets the requirements. Then, use a special tool or wrench to tighten the connection accessory to the gas equipment. During this process, be careful to control the force and do not over-tighten to avoid damaging the hose or connection accessories. At the same time, make sure that the connection is not loose and has no gaps to ensure the tightness of the gas system.

After completing the connection, we need to conduct a strict leak check. You can use soapy water or a special gas leak detection agent to apply it to the connection and observe whether there are bubbles. If bubbles are generated, it means that there is a gas leak, and you need to recheck the connection immediately and tighten it. This process must be careful and patient to ensure that there are no omissions.